Inserting A Block - Siemens sinumerik 840D sl Operating Manual

11.3

Inserting a block

You have the option of traversing the axes and writing the current actual values directly to a
new position block.
Requirement
"AUTO" mode: The program to be edited is selected.
Proceed as follows
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the <TEACH IN> key.
4. Press the "Teach prog." softkey.
5. Traverse the axes to the relevant position.
6. Press the "Teach position" softkey.
A new program block with the current actual position values will be
created.
Teaching in a program
11.3 Inserting a block
507