Relocating A Multitool - Siemens sinumerik 840D sl Operating Manual

13.14.8

Relocating a multitool

Multitools can be directly relocated within magazines to another magazine location, which
means that you do not have to unload multitools with the associated tools from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty
location. You may also directly specify an empty magazine location.
Procedure
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
3. Position the cursor at the multitool that you wish to relocate to a
different magazine location.
4. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is
displayed. The "Location" field is pre-assigned with the number
of the first empty magazine location.
5. Press the "OK" softkey to relocate the multitool to the
recommended magazine location.
OR -
Enter the required magazine number in the "...magazine" field
and the required magazine location number in "Location" field.
Press the "OK" softkey.
The multitool with the tools is relocated to the specified
magazine location.
Tool management
13.14 Working with multitool
579