Dell EMC PowerEdge VRTX User Manual page 204

Item Description
Firmware version Firmware version of the Hard Disk Drive
State Offline, Online, or Standby — Indicates the power status of the hard disk drive.
Table 55. Server Status
Item Description
Name/Location Example: Server 1, Server 2, and so on.
No Errors If there are no errors, No Errors is displayed. Else, error messages are listed where critical ones are first listed,
and then the warning-related. For more information, see "LCD Error Messages".
Slot Name Chassis slot name. For example, SLOT-01.
Name Name of the server, which the user can set through Dell OpenManage. The name is displayed only if iDRAC has
finished booting, and the server supports this feature, else iDRAC booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Displays if iDRAC finished booting.
Version
IP4 <enabled, Displays the current IPv4 enabled state.
disabled>
IP4 Address: Only displays if IPv4 is enabled.
<address,
acquiring>
IP6 <enabled, Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state.
disabled>
IP6 Local Address: Only displays if iDRAC supports IPv6 and IPv6 is enabled.
<address>
IP6 Global Only displays if iDRAC supports IPv6 and IPv6 is enabled.
Address:
<address>
FlexAddress Only displays if the feature is installed. Lists the fabrics enabled for this server (that is, A, B, C).
enabled on
Fabrics
The information in the table is dynamically updated. If the server does not support this feature, then the following information does
not appear, else Server Administrator options are as follows:
• Option "None" = No strings must be displayed on the LCD.
• Option "Default" = No Effect.
• Option "Custom" = Allows you to enter a string name for the server.
The information is displayed only if iDRAC has completed booting. For more information on this feature, see the RACADM Command
Line Reference Guide for CMC in PowerEdge VRTX.
204
NOTE: You can set this table through the CMC CLI or CMC Web interface.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10.