NOTE: Because the network transport for the forwarded log entries is UDP, there is no guaranteed delivery of log
entries, nor is there any feedback to CMC about whether the log entries were received successfully.
Configuring Services Using CMC Web Interface
To configure CMC services using CMC web interface:
1.
In the left pane, click Chassis Overview, and then click Network → Services. The Services Management page is displayed.
2.
Configure the following services as required:
•
CMC Serial
•
Web Server
•
SSH
•
Telnet
•
Remote RACADM
•
SNMP
•
Remote Syslog
For information about the fields, see the Online Help.
3.
Click Apply, and then update all default time-out and maximum time-out limits.
Configuring Services Using RACADM
To enable and configure the various services, use the following RACADM objects:
•
cfgRacTuning
•
cfgRacTuneRemoteRacadmEnable
For more information about these objects, see the Chassis Management Controller for PowerEdge VRTX RACADM Command Line
Reference Guide available at dell.com/support/manuals.
If the firmware on the server does not support a feature, configuring a property related to that feature displays an error. For example,
using RACADM to enable remote syslog on an unsupported iDRAC displays an error message.
Similarly, when displaying the iDRAC properties using the RACADM getconfig command, the property values are displayed as N/A
for an unsupported feature on the server.
For example:
$ racadm getconfig -g cfgSessionManagement -m server-1
# cfgSsnMgtWebServerMaxSessions=N/A
# cfgSsnMgtWebServerActiveSessions=N/A
# cfgSsnMgtWebServerTimeout=N/A
# cfgSsnMgtSSHMaxSessions=N/A
# cfgSsnMgtSSHActiveSessions=N/A
# cfgSsnMgtSSHTimeout=N/A
# cfgSsnMgtTelnetMaxSessions=N/A
# cfgSsnMgtTelnetActiveSessions=N/A
# cfgSsnMgtTelnetTimeout=N/A
Configuring CMC Extended Storage Card
You can enable or repair the optional Removable Flash Media for use as an extended non-volatile storage. Some CMC features
depend on extended nonvolatile storage for their operation.
To enable or repair the Removable Flash Media using the CMC web interface:
1.
In the left pane, go to Chassis Overview, and then click Chassis Controller → Flash Media.
2.
On the Removable Flash Media page, from the drop-down menu, select one of the following as appropriate:
•
Repair active controller media
78