Table of Contents
Advertisement
R240D
Hardware Installation and Maintenance Guide
When you remove the shield layer, do not damage the insulation of the twisted-pair cable.
Figure 5-29 Removing the jacket of a twisted-pair cable (unit: mm (in.))
Step 2 Align the four pairs of wires and cut the ends neatly, as shown in Figure 5-30. The
connections between the wires and the pins are listed in Table 5-6.
Figure 5-30 Connections between wires and pins (unit: mm (in.))
Pin 8
Table 5-6 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
8
Step 3 Feed the cable into the plug, and crimp the connector, as shown in Figure 5-31.
Issue 03 (2016-01-26)
Pin 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
16
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
5 Appendix
C
40
Advertisement
Table of Contents
