Specifying Settings From The Touch Panel Display - Brother PA-TDU-001 Quick Setup Manual

Touch Panel Display Settings
The settings for the touch panel display can be specified either by using the touch panel, or by
using a tool on a computer connected to the printer. For details on connecting the printer to a
computer and specifying the settings, see the User's Guide included on the CD-ROM.

Specifying Settings From the Touch Panel Display

Press [ ] (settings key) or [
a parameter, and then press [OK].
1
The scroll bar indicates the first parameter with the up arrow, and the last parameter with the down arrow. If the last
parameter is selected, pressing [b] scrolls to the first parameter. If the first parameter is selected, pressing [a] scrolls
to the last parameter.
2
The currently selected parameter is highlighted.
With the touch panel display attached to the printer, the following settings can be specified.
Key Parameter
Print Density
(settings
key)
Confirm Print
Text Direction
Exit Position
Backlight
LCD Contrast
Beeper
Set Panel
12
] (admin key) to display the menu screen. Press [a] or [b] to select
1
Settings
-5/-4/-3/-2/-1/0/+1/+2/+3/
+4/+5
On/Off
Normal/Inverted 180
Tear/Peeler
On/Off
+2/+1/0/-1/-2
On/Off
A/B
2
Description
Adjust the printer's printing
density.
Select whether a message
appears before printing so that
the number of copies can be
confirmed.
Select the printing orientation.
Select the media exit location.
Select whether the LCD
backlight is turned on.
Select the LCD contrast.
Select whether the printer beeps
when a touch panel key is
pressed.
Select which touch panel will be
used.