Brother PA-TDU-001 Quick Setup Manual page 9

a
Press and hold the
turn the printer off, and then disconnect
the printer from the AC power outlet. If
the rechargeable Li-ion battery
(optional) is installed, remove the
rechargeable battery.
b
Press the cover release lever on either
side and lift up to open the RD Roll
compartment top cover.
c
Using a coin or similar object, slowly turn
the time/date battery cover in the
direction of the arrow on the battery
cover until it stops, and then remove the
time/date battery cover.
If the time/date battery cover is forcibly
turned past the stop position, it may be
damaged.
d
Install the battery.
Be sure to insert the new battery with
the + and – sides facing the correct
direction.
NOTE
When removing the battery, press part A,
shown below, to release the battery so
that it can easily be removed.
8
(Power) button to
e
Return the time/date battery cover to its
original position, and then use a coin or
similar object to slowly turn the
time/date battery cover in the opposite
direction of the arrow on the battery
cover until it stops in order to install the
time/date battery cover.
If the time/date battery cover is forcibly
turned past the stop position, it may be
damaged.
f
Close the RD Roll compartment top
cover. Press down until it snaps into
place.
NOTE
The time and date can be configured from
the [ ] (admin key) on the touch panel.
For details, see the User's Guide included
on the CD-ROM.
LCD
Lift up the LCD, and then adjust it to an angle
so that the screens are visible. If the screen is
dark and hard to read, the backlight can be
turned on. For details, see Specifying
Settings From the Touch Panel Display
on page 12.
Screen
When the printer is turned on, the main
screen appears.
3 4 5
1
2
6