Brother PA-TDU-001 Quick Setup Manual page 17

f
After inserting the text, click the text box
to move it within the template.
g
Repeat steps e and f to enter text and
arrange the layout.
After entering text, click [File] - [Save
as] on the menu bar, and then specify
the file name for saving the data.
NOTE
The first ten characters of the file name
will appear on the LCD as the template
name when the touch panel display is
used.
Setting the Text and Order for
Displaying on the LCD
Using P-touch Editor 5.0, the text displayed
on the LCD and its display order can be set.
a
In P-touch Editor 5.0, open the label
layout to be edited.
b
Select the text box for text to be
displayed on the LCD, right-click it, and
then click [Properties] to display the
[Text Properties] dialog box. In the
[Object Name] box on the [Expanded]
tab, set the desired number (for
example, "Text1", "Text2" or "Text3").
The text will be displayed on the LCD in
the order of the set numbers.
To set that text not be displayed on the
LCD, select the [Text Cannot Be
Edited] check box on the [Expanded]
tab.
16
Inserting the Date and Time in a Label
a
In P-touch Editor 5.0, open the label
layout to be edited.
b
On the menu bar, click [Insert] -
[Date/Time] to display the [Date and
Time Properties] dialog box. Select
settings for the format of the text to be
inserted.
 If the [At Printing] check box (1) is
selected, the date and time of
printing will be inserted. If the check
box is cleared, the current date and
time will be inserted and will not be
updated.
 The date and time inserted into the
label will be printed in the printer's
built-in character size. Since the
character size is determined by the
size of the date and time object,
adjust the object to the desired size
in P-touch Editor 5.0 before
transferring the label layout to the
printer.
1