Brother PA-TDU-001 Quick Setup Manual page 25

b
With [a] or [b], type in the number of
copies to be printed, and then press the
(Print) button or [OK]. The labels are
printed.
If a template with a linked database is
assigned to a one-touch key, be sure
that [Confirm Print] is set to [On]. If
[Off] is selected, only the first database
can be selected.
NOTE
• The number of copies to be printed can be
set between 1 and 999.
• If the template contains a serialized
number, the labels will be printed with the
serialized field incremented by the
specified number of times.
Printing a Different Date/Time
Than the Printer's Internal
Clock
The date/time can be temporarily changed
before printing. When the following screen is
displayed immediately before printing begins,
press [ ] (settings key) to display a screen
where the date/time can be directly entered.
Printing can be continued after the date/time
is entered.
In addition, by pressing [
then setting [Set Temp Time] to [Cont
From Last], the date/time that was directly
entered will be printed until the printer is
turned off.
NOTE
• If settings have been specified to
add/subtract a period of time to the
date/time in a template, the specified time
period will be added to (or subtracted
from) the directly entered date/time.
24
] (admin key),
• This function is available with firmware
version 1.04 or later.
The newest version can be downloaded
from the support website (Brother
Solutions Center).
http://support.brother.com/