Brother PA-TDU-001 Quick Setup Manual page 7

d
While holding the RD Roll compartment
top cover securely, use a screwdriver to
remove the four screws (1).
Be careful not to allow the top cover to
fall when the four screws are removed.
e
Close the RD Roll compartment top
cover, and then remove the top cover
(1).
6
f
Plug the connector on the touch panel
display into the connector on the printer.
Insert the four tabs on the touch panel
display into place on the printer.
1
1
Be careful that the connector cords are
not trapped by the cover. In addition, if
the cords are caught between the screw
holes, the cords may be damaged when
the screws are tightened.