Parity
A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host
device requirements.
•
Select Odd parity to set the parity bit value to 0 or 1, based on data, to ensure that an odd number of 1 bits
are contained in the coded character.
•
Select Even parity to set the parity bit value to 0 or 1, based on data, to ensure that an even number of 1 bits
are contained in the coded character.
•
Select None when no parity bit is required.
Odd
*
None
Data Bits
This parameter allows the decoder to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
7-Bit
Serial Interface
Even
*
8-Bit
7 - 9