Scanning Sequence Examples - Motorola Symbol PL4507 Integration Manual

5 - 2 Symbol PL4507 Decoder Integration Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to disable the decode aiming pattern,
scan the Disable Decode Aiming Pattern bar code listed under
that use a beeper and LED, a fast warble beep sounds and the LED lights, signifying a successful parameter entry.
Other parameters, such as Crop to Pixel Address, require scanning several bar codes. See these parameter
descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Imager Preferences Parameter Defaults
Table 5-1 lists defaults for imager preferences parameters. To change any option, scan the appropriate bar code(s)
provided in Imager Preferences on page
NOTE See
miscellaneous default parameters
Imager Preferences Default Table
Table 5-1
Imaging Options
Decoding Autoexposure
Decoding Illumination
Decode Aiming Pattern
Aim Brightness
Illumination Brightness
Low Light Enhancement
Presentation Mode Field of View
Frame Rate
Image Capture Autoexposure
Image Capture Illumination
Gain
Exposure Time
LED Illumination
5-4.
Appendix A, Standard Default Parameters
Parameter
Decode Aiming Pattern on page
for all user preferences, hosts, symbologies, and
Parameter
Default
Number
F0h 29h Enable
F0h 2Ah Enable
F0h 32h Enable
F0h 9Ch 0
F0h 9Dh 10
F1h 64h Disable
F1h 61h Default (Reduced)
F1h A2h Auto
F0h 68h Enable
F0h 69h Enable
F4h F0h A7h 100
F4h F1h 37h 10 (1 ms)
F0h ADh Internal LED Illumination
5-6. For systems
Page
Number
5-5
5-6
5-6
5-7
5-7
5-8
5-8
5-9
5-10
5-10
5-11
5-11
5-12