Installing (Replacing) The Sub Clamp On The Left Side - Brother RH-9820 Service Manual

7-37. Installing (replacing) the sub clamp on the left side

If necessary, the sub clamp can be removed from the right side and can be installed on the left side instead. In this case, the
following optional parts are required.
1. Stop the air and then bleed the air. (Refer to "3-16. Adjusting the air pressure" in the instruction manual.)
2. Remove the feed base unit (1) from the bed. (Refer to "5-3. Feed mechanism".)
3. Disconnect the air tubes (2) and (3) from the joints (4) and (5).
4. Remove retaining ring C (6).
(Top)
To install the sub clamp on the left side, first have the following
option parts ready.
Ref. No.
(34) SA7152001
(9) (10) SA5683001
* Be sure to remove the stickers (A) before using the air
hoses (9) and (10).
1167B
RH-9820
7. ADJUSTMENTS
Code Qty.
1 Sub clamp wrist L
2
Air hose (outer dia. 4
mm, inner dia. 2.5 mm,
length 750 mm)
(Continued on next page)
Part name
1168B
192