Thread Take-Up Mechanism - Brother RH-9820 Service Manual

6-5. Thread take-up mechanism

Insert the roller (4) into the groove in the thread take-up cam, and then insert the thread take-up L support
shaft (8).
* Apply the grease specified by Brother (MOLYKOTE LONGTERM W2 manufactured by Dow Corning
Corporation) in the places indicated by
Insert the wick (1) into the groove,
wind it around and then tie it.
Tie.
Apply adhesive (3M DP-125
clear) and then install.
*
Be sure to wipe away any
excess adhesive.
0829B
0830B
Push in the felt (10) so that the wick
(1) touches the thread take up lever
.
support shaft (8)
.
Application location
0831B
RH-9820
6. ASSEMBLY
1. Wick
2. Oil tube
3. Fastening band
4. Roller
5. Roller shaft
6. Set screw
7. Thread guide
8. Thread take-up L support shaft
9. Set screw
10. Felt
0828B
64