Table of Contents
Advertisement
If there is no ECU Information available, a warning message
shows on the display.
2)
Press the N button to return to previous menus.
Readiness Test
Important: The Readiness Test function is used to check the
operations of the Emission System on OBD2/EOBD compliant
vehicles. It is an excellent function to use prior to having a vehicle
inspected for compliance to an emissions program.
"Pass" -- Indicates that a particular monitor being checked has
completed its diagnostic testing.
"Fail" -- Indicates that a particular monitor being checked has
not completed its diagnostic testing or the monitor is not
supported on that vehicle.
1) Use the UP/DOWN scroll buttons to select Readiness Test from
Select Function menu and press the Y button.
If the scan tool is not connected yet, then refer to Reading
Codes from 1 to 7 at Paragraph 3.1.
< V2.6 USB-V1.9 SERIAL SOFTWARE
< V2.6 USB-V1.9 SERIAL SOFTWARE
ECU Information
VAG No.: 06A906032TF
Component:
Bosch
1.815VT
0020
Coding: 0008570
Imp:
0000 WSC: 000078
Select Function
1) Read Code
2) Erase Code
3) ECU Information
►4) Readiness Test
15
15
V
Advertisement
Table of Contents
