Table of Contents
Advertisement
If the retrieved DTCs contain any manufacturer specific or
enhanced codes, you will be prompted to refer to the CD DTC
library or the vehicle service manual to view the DTC
definitions.
10) If more than one DTC is found, use the UP/DOWN scroll buttons,
as necessary, until all the codes have been shown up.
Erasing Codes
1) If you decide to erase the DTCs, use the UP/DOWN scroll
buttons to select Erase Codes from the OBDII/EOBD DIAG.
menu and press the Y button.
If the scan tool is not connected or no communication is
established with the vehicle yet, then refer to Reading Codes
from 1 to 8 at Paragraph 3.2.
2) A warning message comes up asking for your confirmation.
3) If you do not want to proceed with erasing the codes, press the N
button to exit. A message of "command cancelled" will show up.
< V2.6 USB-V1.9 SERIAL SOFTWARE
< V2.6 USB-V1.9 SERIAL SOFTWARE
OBDII/EOBD DIAG.
►1) Read Codes
2) Erase Codes
Erase Codes
Erase Trouble Codes!
Are you sure?
<YES> NO
19
19
V
Advertisement
Table of Contents
