Table of Contents
Advertisement
If there are no Diagnostic Trouble Codes present, the display
will indicate "NO CODES ARE STORED IN THE
MODULE!"
If there are any Diagnostic Trouble Codes present, the Fault
Codes and Pending Codes will be reported on the display.
The DTC number will appear on the upper left hand corner
●
and its definition will show on the body of screen.
The type of code (Generic or Manufacturer specific), the
●
vehicle protocol, the sequence of the DTC currently being
observed, the total number of codes detected and the module
ID will be observed on the upper right hand corner of the
display.
If the code being displayed is a pending code, the Pd icon will
●
be observed next to the DTC number on the upper right hand
corner of the display.
When a DTC's definition covers more than one display screen,
●
use the Y button, as necessary, to view any additional
information.
< V2.6 USB-V1.9 SERIAL SOFTWARE
< V2.6 USB-V1.9 SERIAL SOFTWARE
OBDII/EOBD DIAG.
►1) Read Codes
2) Erase Codes
P0118
Pd
ISO9141
Pressure Control
Solenoid A Control
Circuit Low
18
18
06/06
$09
↓
V
Advertisement
Table of Contents
