HP 9000 Installation Manual page 30

I/O Card Installation Guide
I/O Card Installation Verification
D. Halt the Boot
If Autoboot is set to ON, you will have to interrupt the boot process to get to the
Process
Boot Console Handler, where you will have access to the commands for verifying
the I/O card installation.
When prompted by the following message, halt the boot process by hitting any key
on the keyboard
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
------- Main Menu -----------------------------------------------------------
Command
-------
BOot [PRI|ALT|<path>]
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>]
TOC
COnfiguration [<command>]
INformation [<command>]
SERvice [<command>]
DIsplay
HElp [<menu>|<command>]
RESET
-------
Main Menu: Enter command >
24
Description
-----------
Boot from specified path
Search for boot devices
Soft boot the system
Access Configurationmenu/commands
Access Information menu/commands
Access Service menu/commands
Redisplay the current menu
Display help for menu or command
Restart the system