HP 9000 Installation Manual page 40

D class and r class i/o card installation

Hide thumbs Also See for 9000:

R Class I/O Card Installation

I/O Card Installation Procedure

G. Remove the I/O

1. Loosen and remove the single screw that secures the I/O slot cover plate to the

Slot Cover Plate

2. Remove the I/O slot cover plate.

H. Set I/O Card

Set the configuration for your I/O card, such as jumper and switch settings,

Configuration

according to the instructions provided with your I/O card.

CAUTION

Some I/O configurations can compete for bus usage with the 802.3 LAN port

integrated on the system /core I/O board of the R Class servers. This results in

possible performance degradation due to an increase in Cyclic Redundancy Check

events and LAN retries.

It is recommended that customers use an 802.3 LAN I/O card as the primary LAN

interface on R3xx models with sustained high I/O activity.

2-8

bulkhead.