Hardware; Processor/Memory Set - HP server rx4610 Service Manual

Chapter 2
Altitude
Operating
Non-operating
Thermal Output
Maximum Operating
Weight and Dimensions
Specification
Height
Width
Depth
Weight
Required front clearance
Required rear clearance
Heat Dissipation

Hardware

Feature
Power system
Server chassis
Cooling system
Miscellaneous

Processor/Memory Set:

-30 to 3,000 m (~ 10,000 ft)
-30 to 12,000 m (~ 40,000 ft)
1007 BTU/hr
31.12 cm (12.25 inches, 7u)
44.45 cm (17.5 inches)
71.12 cm (28.0 inches)
68.1 kg (150 lbs.)
3 inches
8 inches
6174 BTU/hr
Four 800-watt, 208/110 VAC autoranging power supplies include integrated
fans for cooling. The rx4610's standard configuration is shipped with four
power supplies. The server requires a minimum of three power supplies to
operate properly. LEDs on the power supplies indicate power-on, failure, and
predictive failure.
The peripherals are:
One IDE DVD drive in a ½-inch carrier.
One IDE diskette drive in a ½-inch carrier.
Two 3.5-inch wide by 1.0-inch low-voltage differential SCSI (LVDS) hard disk
drives mounted side-by-side.
Eight 64-bit/66 MHz Hot Plug PCI I/O expansion slots.
Two 64-bit/33 MHz Non-hot Plug PCI expansions slots.
Four 172 mm fans and two 120 mm fans circulate cooling air through the
server. The server requires a minimum of five fans to function properly. An
LED indicator mounted on each fan assembly identifies a failed unit.
Integrated power supply fans cool and circulate air through the power
supplies and the upper level of the chassis.
2
Integrated circuit bus (I
Real-time clock/calendar (RTC)
System controls and indicators (LEDs) on the front side of the chassis.
Basic Input/Output System (BIOS), Power on Self Test (POST), and Setup
Utility stored in a flash memory device.
QLogic SCSI Utility
Field Replacement Unit (FRU) and Sensor Data Record (SDR) view utility.
Value
Comment
C) for diagnostic and intrachassis communication.
System Information
11