Related Manuals - Mitsubishi Electric FR-A820-00046 Instruction Manual

Introduction
Symbol Overview
³
·
»
¿
´
²
¶
º
¾
µ
¸
¹
Tab. 1-5:
1.5

Related manuals

The manuals related to the FR-A800 inverters are shown below:
Manual name
FR-A800 Installation Guideline
FR-A802 (Separated Converter Type) Instruction Manual (Hardware)
FR-CC2 (Converter unit) Instruction Manual
FR-A806 (IP55/UL Type 12 specification) Instruction Manual (Hardware)
FR Configurator2 Instruction Manual
FR-A800/F800 PLC function programming manual
FR-A800/F800 Safety stop function instruction manual
Tab. 1-6:
For details of the separated converter type refer to the FR-A802 (Separated Converter Type) Instruc-
tion Manual (Hardware).
For details of the IP55 compatible model refer to FR-A806 (IP55/UL Type12 specification) Instruction
Manual (Hardware).
FR-A800
Install the inverter.
Perform wiring for the power supply and the motor.
Select the control method (V/F control, Advanced magnetic flux vector control, vector
control, or PM sensorless vector control).
Input the start command via communication.
The PU gives both start and frequency commands.
(PU operation mode)
The PU gives a start command, and inputs to terminal RH, RM, and RL give a frequency
command.
(External/PU combined operation mode 2)
The PU gives a start command, and voltage input to terminal 2 gives a frequency command.
(External/PU combined operation mode 2)
The PU gives a start command, and current input to terminal 4 gives a frequency command.
(External/PU combined operation mode 2)
Inputs to terminal STF and STR give a start command, and the PU gives a frequency
command.
(External/PU combined operation mode 1)
Inputs to terminal STF and STR give a start command, and inputs to terminal RH, RM, and RL
give a frequency command.
(External operation mode)
Inputs to terminal STF and STR give a start command, and voltage input to terminal 2 gives a
frequency command.
(External operation mode)
Inputs to terminal STF and STR give a start command, and current input to terminal 4 gives a
frequency command.
(External operation mode)
Steps of operation
FR-A800 inverters related manuals
Related manuals
Refer to page
2-12
2-26
5-56
5-189
4-13
4-16
4-18
4-20
4-22
4-24
4-26
4-28
1 - 7