ETP4830-A1
User Manual
4.2.2 Installing a Rectifier
Procedure
Step 1 Push the locking latch towards the left.
Step 2 Draw the handle downwards.
Step 3 Insert the rectifier into the slot and slide the rectifier into the subrack along the guide rail.
Step 4 Push the handle upwards.
Step 5 Push the locking latch towards the right to secure the handle.
Figure 4-4 Installing rectifiers
----End
4.3 Connecting Cables
Before connecting a cable, ensure that the AC power input is off.
4.3.1 Connecting the Ground Cable
Figure 4-5
Issue 06 (2014-02-20)
shows how to connect the ground cable (an M4 OT terminal is used for the cable).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation
24