Main Menu - Huawei ETP4830-A1 User Manual

ETP4830-A1
User Manual

Main Menu

Step 3 Connect the network port on your PC to the FE port on the SMU.
The SMU has only one FE port. Remove the existing network cable from the FE port before
you perform step 3 and reconnect the network cable after you finish setting the parameters.
Step 4 Set the PC IP address in the same network segment as the SMU IP address set in step 2.
Assume that the SMU IP address is 192.168.0.10 and its subnet mask is 255.255.255.0. Set
the PC IP address to 192.168.0.11 and its subnet mask to 255.255.255.0.
Step 5 Enter the SMU IP address in the address box on the PC. Log in to the WebUI on the login
page shown in
The default user name is admin, and the default password is 001.
Figure 6-1 WebUI login page
Step 6 On the Network Configuration page, select SNMP.
Issue 06 (2014-02-20)
Second-Level
Menu
Gateway
Figure 6-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
192.168.0.1
6 Commissioning
Setting
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
37