Page 1
TP48200A-HT19C4-1 and TBC300A-TCA2 Telecom Power User Manual Issue Date 2019-11-15 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
The "NOTICE", "CAUTION", "WARNING", and "DANGER" statements in this document do not cover all the safety instructions. They are only supplements to the safety instructions. Huawei will not be liable for any consequence caused by the violation of general safety requirements or design, production, and usage safety standards.
1.2 Personnel Requirements Personnel who plan to install or maintain Huawei equipment must receive thorough training, understand all necessary safety precautions, and be able to correctly perform all operations. ...
2 Overview Overview 2.1 Overview The TP48200A-HT19C4-1 is an integrated communications power system that supplies power to and backs up power for -48 V DC outdoor communications equipment. The TBC300A-TCA2 is a thermal electric cooler (TEC) battery cabinet and supplies backup power for communications equipment.
Network application over a fast Ethernet (FE) port and an RS485/RS232 port. Communication with Huawei NetEco or third-party network management systems (NMSs) over protocols such as the Simple Network Management Protocol (SNMP) and Hypertext Transfer Protocol Secure (HTTPS) to enable remote management and unattended working.
TP48200A-HT19C4-1 and TBC300A-TCA2 Telecom Power User Manual 2 Overview Figure 2-5 Conceptual diagram 2.5 Configurations Table 2-1 describes the system configurations for the TP48200A-HT19C4-1 and TBC300A-TCA2. Table 2-1 Configurations Item TP48200A-HT19C4-1 TBC300A-TCA2 Application environment Class C Temperature control unit (TCU)
BTEMP 3.6 Temperature Control Unit The TP48200A-HT19C4-1 equipment compartment uses an HXC150S to cool the air while the battery compartment and battery cabinet use TECs. The HXC150S consists of an internal circulation fan, an external circulation fan, and a heat exchanging core while the TEC consists of a TEC and a TCUA control box.
4 Maintenance Figure 4-2 Installing a rectifier Step 7 Remove the protective gloves. ----End Follow-up Procedure Pack the removed component and send it to the local Huawei warehouse. 4.4.2 Replacing an SMU Prerequisites The cabinet door key is available.
4 Maintenance Figure 4-4 Installing an SMU ----End Follow-up Procedure Pack the removed component and send it to the local Huawei warehouse. 4.4.3 Replacing an AC SPD Prerequisites An ESD wrist strap, ESD gloves, ESD box or bag, required tools, and cabinet door key are available.
Power User Manual 4 Maintenance Follow-up Procedure Pack the removed component and return it to the local Huawei warehouse. 4.4.6 Replacing the Internal Circulation Fan of the Heat Exchanger Prerequisites You have obtained an ESD wrist strap, a pair of ESD gloves, an ESD box or bag, the cabinet door key, and a tool kit.
Equipment compartment: IP55 Battery compartment: IP55 Installation mode TP48200A-HT19C4-1: Can be installed on a floor, rooftop, and wall, but cannot be stacked or installed along a pole. TBC300A-TCA2: installed on a floor, installed against a wall Issue 03 (2019-11-15)