Huawei TP48200A-HT19C4-1 User Manual page 81

TP48200A-HT19C4-1 and TBC300A-TCA2 Telecom
Power
User Manual
Figure 4-26 Removing the temperature sensor cable
Step 3 Cut off the cable tie of the sensor in the equipment compartment and remove it.
Figure 4-27 Position of the temperature sensor in the equipment compartment
(1) Temperature sensor for the equipment compartment
Step 4 Properly place the new temperature sensor in the equipment compartment and bind it securely
with a cable tie.
Step 5 Reconnect the temperature sensor cable to the UIM.
Step 6 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Issue 03 (2019-11-15) Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
74