Huawei ETP4830-A1 User Manual page 42

ETP4830-A1
User Manual
Table 6-10 IP parameters
Main Menu
Quick Settings
----End
Setting Parameters Before NetEco Management
Before you use the NetEco to perform remote management, set the required parameters.
Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway address as shown in
Table 6-11 IP parameters
Main Menu
Quick Settings
Issue 06 (2014-02-20)
Second-Level
Menu
IP Address
Subnet mask
Gateway
Second-Level
Menu
IP Address
Subnet mask
Gateway
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
Table
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
6 Commissioning
Setting
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
6-11.
Setting
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
the network
administrator.
Set this parameter
according to the
address assigned by
35