PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
12.17. Removal of Ballasts 1 and 2 (B/Q-Module)
(1)
Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2)
Unscrew the 2 screws and remove the blindfold board.
(3)
Unscrew the 6 screws and remove the connection terminals
panel with S-P.C.Board and SL-P.C.Board.
(4)
Unscrew the 2 screws and remove the ballast reinforcement
metal fittings.
(5)
Loosen each of 3 screws until they idle, remove the lamp units 1
and 2.
(6)
Unscrew each of 1 screw and release 2 lamp unit terminals of the
ballast block L.
40