Dell S5000 Deployment/Configuration Manual page 13

Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE
Figure 12: Confirming to keep the default value for 'Replay Profiles'
The last step in configuring the Dell Compellent Storage Center array is mapping the newly created
volume to the server. Once you create the volume, you will be asked if you want to map it to a server
object. You can do it at this time or later. If mapping the volume to a server object later, on the left-
hand pane under 'Storage->Volumes', simply right click on the volume you just created and select
'Map Volume to Server'. You can then select the respective server object that you created prior.
As soon as the HBA on the Windows server detects storage available for it, it will be detected in the
Windows disk management administration tool after performing a disk scan. To perform a disk scan,
right click 'Disk Management' on the left-hand pane and select 'Rescan Disks'. You must right click the
detected virtual disk and initialize it. Below in Figure 13, you can see we have already initialized the disk
(Disk 1) and formatted it as NTFS.
13 Deployment of a Converged Infrastructure with FCoE
Deployment/Configuration Guide