Table of Contents
Advertisement
System Description
Receiver Side Specification
Item
Noise Figure
RX RF Band
RX Spurious Emission
Normal Received
Power
AGC Dynamic Range
Allowable TX-RX
Interference Level
RF Interference
RX Input VSWR
Alarm Function
Monitoring
Co-CH Interference
1 dB deg.
C/I
23
1-18
Table 1.4-3 Receiver Part
11.5 dB typical
12 dB guaranteed
Noise figure is measured at Point C (antenna port) in accordance
with ETSI EN302 217-1 (2007-06) & at maximum gain of RF AMP.
70/80 GHz band (E-band)
in accordance with ETSI EN302 217-3 V1.3.1 (2009-07) Annex UC
70 GHz band: 71,125 to 75,625 MHz
80 GHz band: 81,125 to 85,625 MHz
<-10 dBm / MHz for out band emission frequency range
<-13 dBm / MHz for spurious emission frequency range
–54 to –25 dBm at Point C and BER of 10
–56 to –25 dBm
<-79 dBm when RSL is -54 dBm
In accordance with Table 1.4-3
Less than 1.5 measured at antenna port
(1) RX Block Failure
(2) RSL Abnormal
(1) Analogue monitor for antenna orientation (0 to 3.3 V)
(2) RSL monitor on WebLT (Level variation: +/- 3 dB)
(3) Inner temperature monitoring (-33 to +85 degree)
Table 1.4-4 RF Interference Sensitivity
First Adjacent CH
3 dB deg.
1 dB deg.
19
0
Note: CW: > f
+/- CS x 250 %
0
Fujitsu and Fujitsu Customer Use Only
Description
-6
Interference
3 dB deg.
-4
BroadOne GX4000 Manual (R3.0) issue 1.03
CW
Remarks
-30
Advertisement
Table of Contents
