Table of Contents
Advertisement
Fujitsu and Fujitsu Customer Use Only
AC 240 V Power Feed
Table 1.6-2 Power Supply Requirement at Interface "A"
Item
(1) Nominal voltage
(2) Normal service
voltage range
(3) Abnormal service
voltage range
BroadOne GX4000 Manual (R3.0) issue 1.03
Immunity to narrow band Specification
Emission of narrowband noise Specification
Table 1.6-2 shows the power supply interface requirement in accordance
with ETSI ETS 132-1 (September 1996) below;
230 Vac at interface "A".
207 to 253 Vac
(a) Abnormal service voltage under steady-state condition
GX4000 will not suffer any damage when subjected to the following
voltage ranges; 0.0 to 207 Vac and frequency tolerance: 45 to 55 Hz
(b) Recovery from steady state abnormal voltage
Following the restoration to the normal voltage range, GX4000 will
automatically restore service and resume operation according to its
specification. And the abnormal voltage shall not lead to the
disconnection of the power supply by causing circuit breakers & so on.
Specification
System Description
1-31
Advertisement
Table of Contents
