Fujitsu BroadOne GX4000 R3.0 Series User Manual page 57

Installation
Step-6: Installing Antenna Base to the Tilt Plate
Step-7: Fixing Antenna Base and Tilt Plate
2-14

Install antenna base to the tilt plate through center pin.
Tilt plate pin
Fit the antenna base hole to the centre pin of tilt plate

Fix the elevation adjusting bolt from mount plate by washer, spring
washer and lock bolts.

Adjust antenna slot base and elevation adjusting bolt
Fujitsu and Fujitsu Customer Use Only
Antenna base
hole
Elevation fixing
bolt
BroadOne GX4000 Manual (R3.0) issue 1.03