Fujitsu BroadOne GX4000 R3.0 Series User Manual page 56

Fujitsu and Fujitsu Customer Use Only
Step-4: Adjusting Elevation Bolt Position
Loosing elevation adjusting bolt to
the right position
Step-5: Grease
BroadOne GX4000 Manual (R3.0) issue 1.03

Loose the elevation bolt to the right position (see below).

Take care for over loosing.

Grease to the azimuth adjusting bolt and screw

Grease to the elevation adjusting bolt and screw

Grease to the antenna base (elevation adjusting bolt fitting part)

Grease to the tilt plate (centre pin and variable slot)
Azimuth
adjusting bolt
Tilt plate
(centre pin)
Elevation
adjusting bolt
Elevation
adjusting bolt
Tilt plate
(variable slot)
Elevation bolt
(fitting part)
Installation
2-13