Table of Contents
Advertisement
Fujitsu and Fujitsu Customer Use Only
Step-7: Fitting thermal tube
Put thermal tape covering connector CN1 and self-bonding insulating tape.
Step-8: FG cable (CN2 side)
One end of UL1007-AWG18 cable is skinned by 30 mm and soldered. Other end is
skinned by 4.5 to 5 mm.
Step-9: Fixing FG cable to the Cable
Skin the cable (10 mm) and FG cable is soldered to the shield mesh.
BroadOne GX4000 Manual (R3.0) issue 1.03
Installation
2-31
Advertisement
Table of Contents
