Use The Open Assist Button - Fujitsu F-022 User Manual

F-022_E2kou
F-022.book 9 ページ ２０１１年２月２４日 木曜日 午後２時４２分
eWipe off water drained from F-022 terminal with dry, clean cloth
etc, and dry naturally.
･ Water, if any, remaining in F-022 terminal may ooze up after
wiping off.
Do not wipe off water remaining in concaves directly with a
･
cotton swab etc.
◆ Charge
Check the followings before and after charging.
Check that F-022 terminal is not wet. Never try to charge the
･
battery when F-022 terminal is wet.
･ Accessories and optional devices are not waterproof/dustproof.
When charging the battery when or after F-022 terminal is wet,
･
adequately drain it and wipe off water with a dry, clean cloth etc.,
before connecting the desktop holder or opening the external
connection jack cap.
When the external connection jack cap is opened for charging,
･
close the cap firmly after charging. It is recommended that the
desktop holder be used for charging to prevent water from
seeping inside from the external connection jack.
Do not use the AC adapter or desktop holder in a bathroom,
･
shower room, kitchen, lavatory or other highly humid area. May
cause fire or electric shock.
Do not touch the AC adapter or desktop holder with wet hands.
･
May cause electric shock.

1.3 Use the open assist button

You can open F-022 terminal just by pressing the dedicated button.
･ Even without using the button, you can easily open F-022
terminal.
Point
When pressing the button, it is recommended that you hold F-022
･
terminal. Be careful not to hit your face, people or objects around
you with F-022 terminal, or drop F-022 terminal on the floor due
to the momentum of opening it.
Pressing the button may not completely open F-022 terminal,
･
depending on its direction.
･ Close F-022 terminal with your hand. If F-022 terminal is not
completely closed, open it completely, and then try again.
9
Chapter 1 Introduction