Shutter Rocker Switch - ABB 2CSYK1102C/S Product Manual

MYLOS Building Automation
®
According to parameter setting, this communication object can be switched by the ON, OFF or Switching input
drive. With Switching the previous value, for example "1", is directly switched to value "0". It is important to ensure
that the communication object can be written from the outside. Therefore cyclic sending is interrupted or is not
possible.
18 Relative dimming
25 Relative dimming
A long input operation via this communication object causes an adjusting command "BRIGHTER" or "DARKER"
to be sent over the bus. At the end of the command a Stop command is sent to the input.
34 Disabling LED
35 Disabling LED
The "Disabling Led" communication object makes it possible to enable (1) the LED so as that it switches
on or off depending on the operating mode selected from the parameters or to disable it (0) forcing it into a
continuous switching off status.
3.1.4

Shutter rocker switch

No. Function
16 Disabling
23 Disabling
The channel circuitry can be blocked or enabled using the communication object.
A blocked channel behaves as if there was no input signal. Communication objects of the channel are still available.
17 Shutter up-down
24 Shutter up-down
This communication object sends a shutter movement control (UP or DOWN) over the bus.
18 Stop/Louvre up-down
25 Stop/Louvre up-down
Telegram value:
According to parameter setting, this communication object can be switched by the ON, OFF or Switching input
drive. With Switching the previous value, for example "1", is directly switched to value "0". It is important to ensure
that the communication object can be written from the outside. Therefore cyclic sending is interrupted or is not
possible.
34 Disabling LED
35 Disabling LED
Operation of communication objects
Rocker switch 1
Rocker switch 2
Rocker switch 1
Rocker switch 2
Object name
Rocker switch 1
Rocker switch 2
Rocker switch 1
Rocker switch 2
Rocker switch 1
Rocker switch 2
"0" OFF
"1" ON
Rocker switch 1
Rocker switch 2
MYLOS Building Automation | Operation of communication objects 37
®
3 bit DPT_Control_
Dimming
3 bit DPT_Control_
Dimming
1 bit DPT_Enable
1 bit DPT_Enable
Type of datum
1 bit DPT_Enable
1 bit DPT_Enable
1 bit DPT_UpDown
1 bit DPT_UpDown
1 bit DPT_Step
1 bit DPT_Step
1 bit DPT_Enable
1 bit DPT_Enable
C,W,T,U
C,W,T
C,W
C,W
Flags
C,W
C,W,T,U
C,T
C,W,T,U
C,T
C,W,T,U
C,W
C,W,T