Operations Related To Raid Group; Operations Related To Volume - Fujitsu ETERNUS DX60 Operation Manual

The executable operations are as follows.
-
Display the server
-
Delete the server
-
Change the server information
-
Reload the server configuration information
-
Add the HBA
-
Delete the HBA

4.1.3 Operations Related to RAID Group

Express can execute operations related to RAID groups in the disk storage system.
Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Display the RAID group
-
Display the RAID group details
-
Create and delete the RAID group
-
Configure the RAID group Eco-mode
Note
When the RAID group corresponds to either following conditions, the disk drive cannot be stopped from the Web Console. Stop the
disk drive by the storageadm spindle stop command:
-
The volume whose volume type is WSV exists in the target RAID group.
-
The volumes in the target RAID group are concatenated with other RAID groups by the LUN Concatenation.
Refer to "Command References" in the
command.

4.1.4 Operations Related to Volume

Express can execute operations related to volumes in the disk storage system.
Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Display the volume
-
Create and delete the volume
-
Forcible delete the volume
-
Format the volume
-
Expand the Thin Provisioning Volume capacity
-
Start and stop the Thin Provisioning Volume restriping
Note
-
The number of maximum volumes that can be made with this product at a time is 128. Make them by dividing into two or more
times when you make volumes that exceed 128.
ETERNUS SF Storage Cruiser Operation Guide for information on the storageadm spindle stop
- 14 -