Nas File System Environment Settings - Fujitsu ETERNUS DX60 Operation Manual

-
If Spanning Tree Protocol (STP) is implemented into the LAN switch for connecting to NAS ports, when the STP function is enabled,
access to the shared folders may fail.
Take the following steps to disable the STP function:
-
When the STP function is not required for network configuration:
Disable the STP function of the LAN switch.
-
When the STP function is required for network configuration:
At only the NAS port connected part of the connection ports of the LAN switch, disable the STP function or configure Port-Fast.
-
When using the antivirus function, create a NAS interface for each port with two CMs.
4.6.3.3

NAS File System Environment Settings

Configures the NAS file system environment settings
DNS Server
The ETERNUS Disk storage system NAS file system sets the DNS Server for performing name resolution.
A primary DNS Server and secondary DNS Server can be registered.
Information
When Active Directory authentication Servers on which the DNS feature is enabled are registered in the ETERNUS Disk storage system,
name resolution is performed using the DNS feature on the Active Directory authentication server. In this case, the DNS Server
information can be displayed on the Web Console.
Authentication Server
Perform configuration of the authentication server to perform client access control to the NAS file system.
Depending on the type of protocol for access, specify the following for the authentication method:
Active Directory
Specify this when accessing the NAS file system using the CIFS protocol.
LDAP
Specify this when accessing the NAS file system using the NFS protocol.
Note
-
The authentication methods that can be operated differ with each protocol. For this reason, when the shared folder is accessed
with an authentication method that is not supported, the authentication system will not operate.
-
In the operation using Active Directory, it is required to synchronize the time between the ETERNUS Disk storage system and the
Active Directory installed authentication server. It is recommended to automatically correct the time by Network Time Protocol
(NTP).
It is possible to register a maximum of 3 authentication servers for each authentication method.
See
Refer to "Configure Authentication Server" in the
Set the access authority to the owner and the group if necessary for the shared folder made by
setting the authentication server.
ETERNUS SF Web Console Guide for information on settings using the Web Console.
- 56 -
"4.6.3.1 Creating Shared Folder" after