Action Required When Management Server Functionality Is Stopped; Caution About Disk Storage System Managed In Several Express's Managers; Caution About Operating Disk Storage System Outside Express's Manager - Fujitsu ETERNUS DX60 Operation Manual

1.
Execute the following batch file on the Management Server to stop the ETERNUS SF Manager services.
/opt/FJSVesfcm/bin/stopesf.sh
2.
Change the IP address of the Management Server.
3.
Execute the following shell script on the Management Server to start the ETERNUS SF Manager services.
/opt/FJSVesfcm/bin/startesf.sh
4.
Create a server information change instruction file on the Management Server, then execute the stgxfwcmmodsrv command
with the -f option specified to change the IP addresses.
[Example] In the case that name of the server information change instruction file is "c:/acm/modfile".
/opt/FJSVswstf/bin/stgxwcmmodsrv -f /acm/modfile
5.
If the IP address of the Management Server is specified for SNMP Trap destination, change the specified IP address using the
ETERNUS Web GUI. Refer to the ETERNUS Web GUI manuals for more information.
6.
Restart the Management Server.
7.
Launch the Web Console and connect to Express's manager running on the Management Server whose IP address has been
changed.
See
Refer to "stgxfwcmmodsrv (Server Information Change Command)" in the
corresponding to the operating system of the Management Server for information on the stgxfwcmmodsrv command and the server
information change instruction file.

5.3 Action Required When Management Server Functionality Is Stopped

If processing stops in Express's manager or the Management Server before an operation started in the Web Console is complete, the
operation result may not be reflected properly in the Express's manager.
In this case, reload the device information to reflect in Express's manager.
Refer to "Reload ETERNUS Disk Storage System Configuration Information" in the
operation procedures.
5.4 Caution about Disk Storage System Managed in Several Express's
Managers
If the same Disk storage system is managed in several Express's managers, the result of an operation initiated in a Web Console
connected to an Express's manager will not be reflected in the other Express's manager.
In this case, reload the device information on other Express's manager, and reflect it in other Express's manager.
Refer to "Reload ETERNUS Disk Storage System Configuration Information" in the
operation procedures.
5.5 Caution about Operating Disk Storage System Outside Express's
Manager
If an operation has been initiated directly in the ETERNUS Disk storage system by the ETERNUS Web GUI, the operation result will not
be reflected in Express's manager.
To reflect the operation result in Express's manager, follow the same procedure as in
in Several Express's Managers".
ETERNUS SF AdvancedCopy Manager Operation Guide
ETERNUS SF Web Console Guide for details on the
ETERNUS SF Web Console Guide for details on the
"5.4 Caution about Disk Storage System Managed
- 87 -