ABB COM600 Series Operator's Manual page 25

1MRS756705 COM600 series 5.1
Operator's Manual
5. Enter a password with minimum length of four characters.
The password is not required to be the same as the current user's password so that
the password can be given to an authorized technician to remove the Hot Line Tag
if needed.
6. Check Block Status Update to block any updates sent to remote, local WebHMI,
or SCADA system.
7. Click Apply to apply Hot Line Tag.
Figure 3.6.5.1-1 Applying the Hot Line Tag
To remove the Hot Line Tag:
1. Open Switch Device Control Dialog by clicking the object on the single line dia-
gram.
2. Select the Hot Line Tag tab.
3. Enter the password.
4. Click Remove to remove the Hot Line Tag.
If you have forgotten your password, you can remove the tag
using the COM600 default password aEc2006rs.
Hot_Line_Tag.bmp
25