Acknowledging Alarms; Filtering Alarms - ABB COM600 Series Operator's Manual

3.7.3.
3.7.4.
32
COM600 series 5.1
Operator's Manual
In the Persisting alarms list, you can see active alarms. The Fleeting alarms list displays
a list of inactive unacknowledged alarms. The alarm list is continuously updated to
present the actual state of the alarm signals.
To view the event list, click View events.
Figure 3.7.2-1 An example view of alarms

Acknowledging alarms

Click Ack to indicate that you have registered and identified the alarm. Acknowledging
an alarm does not remove the alarm, but changes the alarm state. An acknowledged
alarm is displayed in blue in the Persisting alarms list. Inactive alarms are displayed in
the Fleeting alarms list.
To acknowledge alarms:
1. Select the check box of the alarms you want to acknowledge in the Alarms list.
2. Click Ack on the menu bar.
3. To acknowledge all alarms at the same time, click Ack all.

Filtering alarms

Filters can be used when you want to display only specific information.
1MRS756705
Alarms.bmp