Figure 3.6.8-1 Busbar coloring drop-down menu
30
COM600 series 5.1
Operator's Manual
each voltage source can have a color that is used for sections they are connected to.
Busbar coloring can also be used to indicate if two or more voltage sources form a loop.
Busbar coloring modes
Busbar coloring modes can be selected from the drop-down menu on the top of the Single
Line Diagram View. There are four modes of busbar coloring:
1. No busbar coloring. All sections are displayed in a default color.
2. Powered/Unpowered based busbar coloring. One color is used for all powered
sections.
3. Voltage level-based busbar coloring. Different voltage levels have different colors.
4. Voltage-source based busbar coloring. The coloring of powered sections depends
on the voltage source.
1MRS756705
busbar_coloring_modes.jpg