Provisional Operation By An Sd Memory Card - Panasonic AFP7PSA1 User Manual

Operation

5.4.4 Provisional Operation by an SD Memory Card

 Provisional operation of a project saved in an SD memory card
Insert an SD memory card, set the mode switch to "RUN", and set the card operation switch to
"CARD" to enable provisional operation of a project saved in the card.
 Switch setting conditions
Switch
Mode switch
Card operation switch
 Procedure
1. Power off the unit.
2. Attach an SD memory card that houses the auto execution file "autoexec.fp7" and the
comment file "comment.fp7", a project to be used for provisional operation, to the CPU
unit.
3. Set the card operation switch to "CARD".
4. Close the cover and power on the unit.
The auto execution file "autoexec.fp7" and the comment file "comment.fp7", a project
saved in the SD memory card, is transmitted to the execution memory RAM.
Transmission of the project takes place when the unit is powered on or the mode
switch is set to "RUN".
5-12
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting
RUN
CARD