Panasonic AFP7PSA1 User Manual page 97

Error codes 40 to 55
Code
Copy failure
40
Cover open
Copy failure
41
No SD card
Copy failure
42 SD card reading error
(FAT / file error)
Copy failure
43
No file
Copy failure
password inconsistency
44
(limited distribution
function)
Copy failure
45
Invalid project data
SD operation
50 impossible
Cover open
SD operation
51 impossible
No SD card
SD operation
impossible
52
SD card reading error
(FAT / file error)
SD operation
53 impossible
No file
SD operation
impossible
54 password inconsistency
(limited distribution
function)
SD operation
55 impossible
Invalid project data
Duplicated or excessive
60
collected I/O maps
Duplicated or excessive
61
registered I/O maps
62 Interrupt error 1
63 Interrupt error 2
(Note) For errors where "Auto clear" is indicated in the 'Operation' column, error clearance is executed when power
supply is cut off, or when the the same operation is executed again after the status has been corrected.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name Operation
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
Stop
Auto clear
8.1 CPU Unit Specifications
Error contents and steps to take
The card cover is open and the copy process cannot be
executed. Close the cover.
Copying cannot be executed because there is no SD
memory card. Insert an SD memory card.
Copying cannot be executed because the SD memory card
is damaged. Insert a normal SD memory card.
Copying cannot be executed because there is no file in the
SD memory card. Check if a project file is saved in the card.
Copying cannot be executed because the password for the
project file saved in the SD memory card is not consistent
with the password for the execution project saved in the built-
in ROM. Check the password settings.
Copying cannot be executed because an error has been
identified in project data saved in the SD memory card.
Check the project data.
SD memory card operation cannot be executed because the
card cover is open. Close the cover.
SD memory card operation cannot be executed because
there is no SD memory card. Insert an SD memory card.
SD memory card operation cannot be executed because the
SD memory card is damaged. Insert a normal SD memory
card.
SD memory card operation cannot be executed because
there is no file in the SD memory card. Check if a project file
is saved in the card.
SD memory card operation cannot be executed because the
password for the project file saved in the SD memory card is
not consistent with the password for the execution project
saved in the built-in ROM. Check the password settings.
SD memory card operation cannot be executed because an
error has been identified in project data saved in the SD
memory card. Check the project data.
There is an error with I/O maps that have been collected in
the CPU unit. Verify the registered data.
There is an error with I/O maps that have been registered in
the CPU unit. Verify the registered data.
There may be a hardware problem. Please contact your
dealer.
The interrupt program definition by INTPG instruction may be
disappeared by rewriting during RUN. Check the program.
8-21