Sntp - GE PACSystems RX7i Reference Manual

3.2.3 SNTP

This tab displays the Simple Network Time Protocol configuration settings when SNTP is active.
SNTP Mode SNTP Mode of operation. Specify the use of Multicast/Broadcast or Unicast settings to
communicate to the time server.
Choices: Multicast/Broadcast or Unicast.
Default: Multicast/Broadcast.
Poll Interval Interval, in seconds, at which new time requests are sent to the server. Only available when
SNTP Mode is set to Unicast.
Valid Range: 16 to 1024, even values only.
Default: 32.
Primary IP IP address of the primary time server in dotted decimal format.
Address
Valid Range: Any valid unicast IPv4 address.
Default: 0.0.0.0.
Secondary IP Optional IP address of the secondary time server in dotted decimal format.
Address
Valid Range: Any valid unicast IPv4 address or 0.0.0.0 if unused.
Default: 0.0.0.0.
Poll Count Number of retransmissions that will be sent when no timely response is received from the
server.
Valid Range: 1 to 100.
Default: 3.
Poll Timeout The time, in seconds, to wait for a response from the server.
Valid Range: 1 to 100.
Default: 2.
GFK-2222AD April 2018
Chapter 3. CPU Configuration
115