Program Scheduling Modes; Figure 43: Typical Sweeps In Constant Window Mode - GE PACSystems RX7i Reference Manual

Cpu
Hide thumbs Also See for PACSystems RX7i:
Table of Contents

Advertisement

Chapter 4. CPU Operation
Constant Window Mode
In Constant Window mode, each sweep can consume a variable amount of time. The Logic Window is
executed in its entirety each sweep. The CPU alternates among the three windows, allowing them to
execute for a time equal to the value set for the Constant Window timer. The overall CPU sweep time is
equal to the time required to execute the Housekeeping, Input Scan, Logic Window, and Output Scan
phases of the sweep plus the value of the Constant Window timer. This time may vary due to sweep-to-
sweep variances in the execution time of the Logic Window.
An application that requires a certain amount of time between the Output Scan and the Input Scan,
permitting inputs to settle after receiving output data from the program, would be ideal for Constant
Window mode.
The value of the Constant Window timer can be configured to be any value from 3 to 255 ms. The
Constant Window timer value may also be set by the programming software or by the user program
using Service Request functions #3, #4, and #5.
The following figure illustrates three successive sweeps in Constant Window mode. Note that the total
sweep times may vary due to sweep-to-sweep variations in the Logic Window, but the time given to the
Communications and Background Windows is constant. Some of the Communications or Background
Windows may be skipped, suspended, or run multiple times based on the Constant Window time.
Abbreviations:
HK = Housekeeping
CC = Controller Communications Window
BPC = Backplane Communications Window
BG = Background Window
4.2

Program Scheduling Modes

The CPU supports one program scheduling mode: the Ordered mode. An ordered program is executed in
its entirety once per sweep in the Logic Window.
146
SWEEP n+1
SWEEP n
HK
INPUT
LOGIC
OUTPUT
OUTPUT
CC
BPC
BG
CC
SYS
BG

Figure 43: Typical Sweeps in Constant Window Mode

PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual
SWEEP n+2
HK
HK
INPUT
INPUT
LOGIC
LOGIC
CC
BPC
OUTPUT
BG
CC
CC
BPC
Constant
Window
Time
GFK-2222AD

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pacsystems rsti-epPacsystems rx3i

Table of Contents