GE PACSystems RX7i Reference Manual page 302

Example Calculation for EGD Utilization on RX3i CPE302/CPE305/CPE310 and RSTi-EP
CPE100/CPE115
The watchdog time configured to 200ms for calculations in the table below:
SN EGD Exchange Type of Exchange Period
1 EGD Exchange#1
2 EGD Exchange#2
3 EGD Exchange#3
4 EGD Exchange#4
5 EGD Exchange#5
6 EGD Exchange#6
7 EGD Exchange#7
8 EGD Exchange#8
Total_EgdImpactPerWDT_ms
EgdProcessorUtilization_%
Normal Sweep – EGD on RX3i CPE302/CPE305/CPE310 and RSTi-EP CPE100/CPE115 Embedded
Ethernet Interface
The following table shows the chart for setting up EGD exchanges on Embedded Ethernet for RX3i
CPE302/CPE305/CPE310 with a no sweep load and no network traffic. The table is a compilation of
results based on testing with two RX3i CPE310 Systems in which one is acting as the EGD Producer and
the other is acting as the EGD Consumer.
GFK-2222AD
Producer 25
Producer 25
Producer 30
Producer 30
Consumer 30
Consumer 50
Consumer 50
Consumer 50
April 2018
Appendix A. Performance Data
Total_EgdImpactPerWDT_ms[n]
1.600
1.600
1.333
1.333
1.333
0.800
0.800
0.800
9.600
4.800
291