Siemens Gigaset 2420 System User Manual page 26

Chapter 3 .
31
the "Dial Number" option. Press OK again to dial the number.
Dialing from the Directory and Call Log
For information about dialing from the Directory or Call Log, see Chapter 5 Directory and Call Log.
Answering Calls
Desk Station
Answer a call at the desk station by pressing the flashing line or INT key, picking up the corded handset, or pressing the unlit
SPEAKER/MUTE key.
Cordless Handset
Answer a call on the cordless handset by pressing the TALK key or by taking the cordless handset from its charger. If you want
to require that the TALK key be pressed when answering a call, you must disable the Auto Call Accept option. See Chapter 7
Customizing Your System for more information.
While on Another Line
You cannot receive an internal call if you are on an internal or external call. Incoming external calls will not ring. Instead
information about the incoming call is displayed and a call pending tone sounds.
Chapter 3
32
You can
• •
hang up the first call and answer the incoming call as you normally would
•
put the active call on hold by pressing the HOLD key and then answer the incoming call
•
desk station only: press the flashing key (the first caller will automatically be put on hold)
• •
cordless handset only: press the TALK or ACCEPT key (the first caller will automatically be put on hold)
After answering the second call, use the TOGGLE key to place the active call on hold and switch to the other call. Pressing
the RELEASE key hangs up the displayed call In the example above, pressing RELEASE would end the call on Line 1.
Making, Answering, and Terminating Calls
Answering, and Terminating Calls
Making,