Siemens Gigaset 2420 System User Manual page 59

1. Bring the charged and powered-up handset to the desk station.
2. Highlight the desired desk station and press
2. Highlight "Deregister" and press
OK
4. Press . A confirmation tone assures you that deregistration is complete.
Local Settings is the largest sub-menu in Mobile Settings. You can customize your display or audio signals, decide to answer
calls by removing the cordless handset from the charger cradle, reset your handset to the factory defaults, or change the language.
To access Local Settings press the MENU key Highlight "Mobile Settings" using the π
and θ keys and press
OK
Highlight Local Settings" using the
Some features can only be enabled or disabled. A checkmark next to a feature means that the feature is enabled or on. Press
MENU or ⇑ to back out of the menu without changing the setting.
Any changes to these settings are effective immediately and persist until you change them.
Tones
The Tones .menu allows you to enable/disable the following tones.
• •
Key Click Tone sounds when you press a key.
•
Battery Warning lets you know that the battery is low.
• •
Range Warning lets you know that you are almost out of the desk station's range.
• •
Acknowledge tone confirms a selection you have made.
• •
Error Tone sounds when the desk station encounters incorrect input.
• •
Sync Tone lets you know that the cordless handset has made radio contact with a desk station.
To enable or disable any one of these tones, highlight "Tones" and press
Auto Backlight
Auto Backlight illuminates the d splay while you are pressing keys and for a short time afterwards To enable or disable
this feature, highlight "Auto Backlight and press
Auto Call Accept
You can answer an incoming call on the cordless handset by pressing the TALK key or by simply taking the cordless
OK
OK
Local Settings
and
OK
OK
keys and press
OK
Highlight the desired tone and press
.
OK