Siemens Gigaset 2420 System User Manual page 53

Hide thumbs Also See for Gigaset 2420:
Table of Contents

Advertisement

Line Seizure Time Short
You can choose which lines your system phones access by setting Automatic Line Seizure which will be discussed later
chapter. The Line Seizure Time Short option controls
To set the length of the post-seizure pause, scroll to the "Line Seizure Time Short" display. Adjust the setting by pressing
SELECT (Qn for short, Qff for long).
Tone Dialing
Tone Dialing transmits a number to the telephone company as a series of notes or tones. The Tone Dialing option allows you to
switch to Pulse Dialing which transmits a dialed number as a series of clicks.
To enable/disable Tone Dialing, scroll to the "Tone Dialing" display. Adjust the setting by pressing SELECT (Qn for Tone
Dialing, Qff for Pulse Dialing).
DTMF Tone Short
You may need to sustain a keypad tone when using a phone card or bank card. The duration of the digital tone (DTMF) generated
when you press a number on the keypad is controlled by this setting, not by your finger pressing on the key.
To set the duration of the DTMF tone, scroll to the "DTMF
Tone Short" display. Adjust the setting by pressing SELECT
(Qn for short, Qff for long).
Fax/Modem Alerting
If you subscribe to your telephone company's distinctive ring service (it is usually part of the basic service package), Fax/modem
calls have a distinctive or non-standard ring. You can adjust the Fax/modem Alerting feature so that an incoming Fax/modem call
will not ring at the desk station or cordless handset.
1.
Scroll to the "Fax/Modem Alerting" display and press SELECT.
2.
Scroll to the desired setting and press SELECT. There are the six selections:
• •
L1 Distinctive Alert Distinctive ringing on L
will be routed to the Fax/modem line.
• •
L2 Distinctive Alert Distinctive ringing on Line 2 will be routed to the Fax/modem line.
• •
Both Distinctive Alert - Distinctive ringing on both Line 1 and Line 2 will be routed to the Fax/modem line.
• •
Line 1 All incoming calls on Line 1 will be routed to the Fax/modem line.
• •
Line 2 All incoming calls on Line 2 will be routed to the Fax/modem line.
• • Off
Automatic Line Seizure
Automatic Line Seizure allows you to pick which outside lines are preferred by various phones in the system.
the amount of time the Gigaset 2420 system pauses after seizing a line.
ne
1
in this

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents