Confirming The Ip Address; Confirming The Global Ip Address; Arcp-890 Settings In Conventional System; Pc Operating Environment - Kenwood TS-890S Setting Manual

5.3.6. Confirming the IP address

Since the IP address of the PC is required when setting up the host station 's broadband
router, confirm the IP address in advance.
The IP address of the PC can be confirmed with ARHP-890. Refer to the chapter "5.3.3.
Settings for connecting to TS-890S". You can confirm by "PC IP address" displayed in the
"Configure LAN Connection" window in Figure 5.5.

5.3.7. Confirming the global IP address

Since the global IP address of host station side is required when setting up the remote
station's ARCP-890, confirm the global IP address in advance. The global IP address is
managed by the internet service provider. Ask your internet service provider or check the
global IP address that your broadband router is acquiring. (Please refer to the instruction
manual of Broadband Router etc.)

5.4. ARCP-890 settings in conventional system

5.4.1. PC operating environment

When operating remotely via Internet connection, the operating environment required for
the PC running ARHP-890 is as follows.
Operating System (OS)*
Processor
System Memory (RAM)
Free Hard Disk Space
Software
Table 5.10 PC operating environment
Windows 10 (version 1703 (OS Build 15063.0) or later, 32-bit or
64-bit version)
Windows 8.1 (RTM or later, 32-bit or 64-bit version)
Windows 7 (Service Pack 1 or later, 32-bit or 64-bit version)
Faster than the recommended CPU for OS on which you are
operating
RAM having the System Memory recommended by the respective
OS used in your PC or larger
100 MB or more of free hard disk space
Microsoft .NET Framework 4.7 (including .NET Framework 4.0)
49